Ask an Expert

All

Shreya

What is a customer loyalty program?

1 Answer
0 Expert

What is a customer loyalty program?

Ecafez
Ecafez
Ecafez
Saivi

It's a relationship building exercise

Saivi | 5 days ago

Shreya

Is salt spray testing appropriate for powder coating and paints?

0 Answer
0 Expert

Is salt spray testing appropriate for powder coating and paints?

Ecafez
Romy

What should be the weld time for MIG welding and spot welding?

1 Answer
0 Expert

What should be the weld time for MIG welding and spot welding?

Shreya

There are three possible answers: 1) GMAW process is used for a Fusion Joint where as Spot Welding is a Non Fusion joint. Hence, time of welding cannot be compared 2) Time depends up on Type and Nature of Joints. Whereas GMAW process is usually applied on plates, Spot Welding is restricted for thin sheets. 3) If GMAW process is applied on thin sheets, in that case, time required shall be more than Spot Welding for a specified length. It also depends on no. of spots to be welded for that particular length. In both the cases,the joints have to be Lap Joint. Practically, all the data are required and mode of metal transfer in GMAW process is required to be known to calculate the welding time. Thank you for giving us a chance to serve you.

Shreya Bhaduri | 6 days ago

Romy

Is visual inspection sufficient for welding upto 3mm thickness?

1 Answer
0 Expert

Is visual inspection sufficient for welding upto 3mm thickness?

Shreya

When it comes to porosity, the American Welding Society dictates that the sum of the diameters of visible porosity should not exceed 3/8 inches, or 9.5 mm, in any linear inch of the weld, or exceed 3.4 inches or 19 mm, in any 12 inch length of a weld.

Shreya Bhaduri | 5 days ago

Romy

Minimum how many tanks are required for nano coating phosphating?

1 Answer
0 Expert

Minimum how many tanks are required for nano coating phosphating?

Shreya

Well, roughly 8 tanks are required for nano coating.

Shreya Bhaduri | 6 days ago

Annu

What is the use of 7QC tools?

1 Answer
1 Expert

What is the use of 7QC tools?

Annu

The 7 QC tools are fundamental instruments to improve the process and product quality. They are used to examine the production process, identify the key issues, control fluctuations of product quality, and give solutions to avoid future defects.

Annu Singh Kundu | 6 days ago

Shreya

Uses of 7 QC tools are - Pareto Chart, Cause and effects diagram, Histogram, Scatter Diagram, Control Chart, Check Sheet, PFD (Process Flow diagram), Graphs.

Shreya Bhaduri | 6 days ago

Ecafez

What are the best practices for welding

1 Answer
0 Expert

What are the best practices for welding

Ecafez

Check the best practices here.

Dhruv M. | 1 week ago

1 Ecafez Total Expert Answered
6 Ecafez Total Answered

Panel of Experts